Brinell Hardness Tester

Products - Brinell Hardness Tester

Display

A device called a Brinell hardness tester is used to measure the hardness of materials, most commonly metals. It functions by placing a spherical indenter—typically composed of tungsten carbide or hardened steel—into the surface of the material to be tested and pressing it there for a predetermined period of time while subjected to a defined load. The diameter of the resulting indentation is measured, and the applied force and the indentation diameter are used to calculate the Brinell hardness number (BHN). This approach yields a representative average hardness value, which makes it especially helpful for materials with rough or uneven surfaces due to the large indentation size.

Part Number : Portable Brinell Tester A1 Portable Brinell Tester | Metal Hardness Testing | A1 - Standard Base | 13 1/2" Gap and 4" Throat | with Stroke Limiter

Brinell Hardness Tester - Covering Abu Dhabi, Dubai, Sharjah and all other emirates

Portable Brinell Tester | Metal Hardness Testing | A1 - Standard Base | 13 1/2" Gap and 4" Throat | with Stroke Limiter

Part Number : Portable Brinell Tester A1

Portable Brinell Tester | Metal Hardness Testing | Long RAM Test Head | with Stroke Limiter

Part Number : Portable Brinell Tester A2

Chain Adapter Hardness Tester | 3000kg Head with Chain Adapter w/ 4” Chain – standard for 15” OD

Part Number : Chain Adapter Hardness Tester A3

King Tester Heads | Standard 3000 kg head | ASTM E-10 standards.

Part Number : King Tester Heads B1

King Tester Heads | 1000KG Low Pressure Test Head

Part Number : King Tester Heads B2

King Tester Heads | 3000kg test head with long ram

Part Number : King Tester Heads B3

King Tester Heads | 1000kg test head with long ram

Part Number : King Tester Heads B4

Bases | C-1: 13 ½” Gap and 4" Throat

Part Number : Bases C1

Bases | C-5: 13 ½” Gap with 6” Throat

Part Number : Bases C5

Bases | C-6: 20” Gap with 4” Throat

Part Number : Bases C6

Bases | C-7: 20” Gap with 6” Throat

Part Number : Bases C7

Chain Adapter w/ 4 feet of roller chain

Part Number : C2

Additional roller chain for A3 or C2

Part Number : C3

Adapter for holding test head in position without base

Part Number : C4

2 x 6 block for 500kg

Part Number : F2